Description: Zabýváme se vývojem a výrobou ekologických teplovodních kotlů, ve kterých lze spalovat kromě lehkých topných olejů (LTO) také použité (regenerované) oleje.
The boiler has been designed for combustion of used (recycled) oil – motor, deep frying, transmission, hydraulic, heavy fuel oil, etc. No modification is needed when shifting from one type of oil to another. Construction ensures automatic running, with no maintenance (operation) – except for emptying the ash after about 300 hours of operation. This takes about 5 minutes.
The boiler is equipped with power regulation and regulation of adjustment to heat take-off. It starts automatically and runs to maximum power, when the heating medium (water) will be heated to the required value 40 – 80 °C. After the required temperature is reached, the power shall be decreased and the required temperature shall be maintained. If heat consumption is lower (or zero) than the minimum power of the boiler, the boiler shall switch off and wait for impulse for next start. Such operation is optimu
Perfect combustion is another advantage of the boiler. The system includes a torch which is not equipped with a nozzle, but only with a narrowed point allowing oil flowing to ensure balanced operation of the boiler even for the lowest power. Minimum oil consumption is from 1 l/h, when we can gain about 10 – 12 kWh depending on the used oil. Emission is odour-and smokeless.