Description: Drive-Tek Force Vent, Vector AC Motors, AC Motors and Encoders from Transdrive Engineering.
Inverter rated vector motors or variable speed motors are used when speed stability and speed range of up to 100:1 are required (dependant on AC drive performance) a Force Vent and Encoder are fitted. We can supply motors 0.18kW to 18.5kW available in 2 and 4 pole (max 18.5kW - 2Pole) (max 15kW – 4Pole) B5 Flange, B14 Face or B3 Foot Mounted.
Drive-Tek Inverter rated Force Vent Motors are used when a speed range greater than a standard AC Motor allows typically 4:1 (50-12.5Hz) if you require more than 4:1 then a force vent is required due to heat problems. Available motors 0.18kW to 18.5kw available in 2 and 4 pole (max 18.5kW - 2Pole) (max 15kW – 4Pole) B5 Flange, B14 Face or B3 Foot Mounted.
Drive-Tek Force Vent Units are designed to fit the Drive-Tek range of aluminium AC Motors in frame sizes D63 – D160 (0.18kW – 18.5kW) Drive-Tek Force Vent Units are supplied as standard with a capacitor so they can be wired as 230V 1PH AC or 400V 3PH AC. An optional band is supplied should you require a greater length to fit over an encoder. They may fit other AC motors, check inside diameter.