Description: The reed winder system was invented to provide a consistent method of applying the thread at a constant or more controlled tension then simply
Reed Winder
How to change Drive Sides.
To move the Bass-Clef Crank-arm to the opposite side. First remove the keyless chuck and then remove the thrust nut. Pull the shaft from the left-side, collecting the thrust washer, and then insert it into and through the right-side. Slide the thrust washer on the main shaft, and then screw on the thrust nut. Tighten the thrust nut to the desired tension. Screw on the keyless chuck. The thrust washers, bearings, and thrust nut faces can be lubricated with grease or oil.